Some of the commonly known fire protection systems are the alarm systems, sprinkler systems, dry pipe systems, standpipe systems, Ansul systems, etc. Before you can secure your occupancy permit, the Fire Department must first approve your fire protection system.
This includes a new system, any alteration or modification to existing systems. It’s advisable for you to be knowledgeable about the mechanics of approval for your fire protection system if you’re a new building occupant or constructing a facility. If you are really interested in buying fire protection system then you can browse online websites.
For a fire alarm and smoke detection system, your system plans must be submitted to the fire prevention bureau for review. The review covers rough inspection of wiring and final acceptance and performance test.
The system shall include products of combustion detectors in corridors, each level landing areas, tops of storage areas and stairways. If you want more explanation regarding Fire Suppression Systems to visit http://www.cakengineer.com/producttype.php.
Thermal detectors shall be placed in janitorial closets, boiler rooms, mechanical equipment rooms, workshop areas and laundry areas. There shall be a specified method to reset or silence the common area detection system from an accessible location near the front entrance per floor.
You might be required to have a remote annunciator panel, in the event the main fire alarm control panel isn’t located by the front entrance to the occupancy. At the same time, you may also be required to install a strobe light at the front of each occupancy.
The strobe light has to be visible from the street and attached to the fire detection system to provide a visual identification of any affected occupancy. The fire protection system shall be monitored by the community’s fire alarm receiving equipment in the 911 Dispatch Center.
Before the fire alarm system is approved, a final inspection should be completed in the presence of the system installer. The contractor shall provide a copy of the Certificate of Completion and license to the Fire Prevention Bureau before its monitoring the performance testing of the system.
Your alarm installer will be required to comply with all applicable NFPA standards, codes. It’s critical to choose a reputable and trustworthy contractor who has been for a lot of years in the business.Continue reading »